Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 968)

Adding a WAN Link
Page 31-8
4. You must now enter a value in at least the Remote Phone Number field under Outgoing
Calls . If you do not make an entry in this field, an error will be returned by the system
when you attempt to save and exit the screen.
You can also make changes to any of the other fields on this screen if they are needed to
provide ISDN call information this WAN Link. The default settings should suit many situa-
tions; however, you will need to determine what information will be needed to support
your ISDN calls and make the appropriate entries in the fields on this screen.
5. Enter the save command when you are ready to create the WAN Link.
The system prompt will then reappear.