Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual

Page 148

Advertising
background image

UI Table Filtering (Using Search and Filter Commands)

Page 4-38

UI Table Filtering (Using Search and Filter Commands)

The amount of information displayed in

UI

tables can be extensive, especially with larger

networks. Common

UI

commands, such as

ipr

,

vivl

,

macinfo

, and

fwt

, often return multi-page

tables. The user can locate specific information in these large tables through the

More?

UI

prompt.

The

More?

prompt appears whenever the maximum number of table entries designated by the

more

command has been reached (the

more

command’s default is 22 lines). Note that if a

table exceeds 22 lines, and the

more

mode has been configured to display more than 100

lines, the following message appears:

Screen Size larger than 100 Lines, Displaying with 22 Lines (Press Any Key)

After pressing any key, only the page of the table is displayed, followed by the

More?

prompt.

Important Note

The switch’s

more

mode is active by default. If the

more

mode is turned off, the Search and Filter commands
cannot be used. For more information on the

more

command, see The UI Configuration Menu on page 4-
17.

A typical

More?

UI

prompt will look like this:

At the

More?

prompt, the user is given a list of options, which includes the Search (

/

) and

Filter (

F

) commands:

<SP>

Press

<SP>

(space bar) to display the next page of information.

<CR>

Press

<CR>

(character return) to display the next line of information.

/

Press

/

to enter the Search mode.

F

Press

F

to enter the Filter mode.

N

Press

N

to renew the search, starting from the next line in the

UI

table.

Q

Press

Q

to exit the

More?

prompt.

?

Press ? to enter the

More?

command Help Menu.

These commands are available for

admin

and

diag

login sessions. Please refer to the following

sections for more information on the Search and Filter commands, as well as renewing a
search, combining Search and Filter commands, and using wildcards.

1 4/6 Brg/ 1/ na 0020da:030995 Tns DFLT Enabld Inactv Disabl AutoSw

1 4/7 Brg/ 1/ na 0020da:030996 Tns DFLT Enabld Inactv Disabl AutoSw
1 4/8 Brg/ 1/ na 0020da:030997 Tns DFLT Enabld Inactv Disabl AutoSw
1 5/1 Brg/ 1/ na 0020da:854050 Tns DFLT Enabld Inactv Disabl AutoSw

More? [<SP>,<CR>,/,F,N,Q,?]

Advertising