Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 210)

Secure Switch Access
Page 8-8
1) FTP Security
Indicates whether or not secure access is enabled for File Transfer Protocol ( FTP ) on the
switch. Enabled means secure access is enabled for FTP services, and only filters on FTP ’s filter
list have authorization. Disabled indicates that secure access is not enabled for FTP services,
and all users can access the switch through FTP.
2) Telnet Security
Indicates whether or not secure access is enabled for Telnet service on the switch. Enabled
means secure access is enabled, and only filters on Telnet’s filter list have authorization.
Disabled indicates that secure access is not enabled for Telnet service, and all users can access
the switch through Telnet.
3) SNMP Security
Indicates whether or not security is enabled for Simple Network Management Protocol ( SNMP )
on the switch. Enabled means security is enabled for SNMP services, and only filters on SNMP ’s
filter list are authorized. Disabled indicates that secure access is not enabled for SNMP services,
and all users can access the switch through SNMP .
4) TFTP Security
Indicates whether or not security is enabled for Trivial File Transfer Protocol on the switch.
Enabled means security is enabled for TFTP services, and only users on TFTP ’s filter list are
authorized. Disabled indicates that security is not enabled for TFTP services, and all users can
access the switch through TFTP .
5) HTTP Security
Indicates whether or not security is enabled for HyperText Transfer Protocol ( HTTP ) on the
switch. Enabled means that security is enabled for HTTP , and only filters on HTTP ’s filter list
are authorized. Disabled indicates that security is not enabled for HTTP , and all users can
access the switch through HTTP .
6) Custom Security
Configures whether or not security is enabled for the custom IP protocol specified in line 62.
Enabled means that security is enabled for the custom IP protocol, and only filters on that
protocol’s filter list are authorized. Disabled indicates that security is not enabled for the
custom IP protocol, allowing all users access to the switch through that protocol.
62) Protocol
(Available for Custom Security only.) The IP protocol number to be included as a secured
access protocol (
IP protocol field in the IP header). You may define only one custom IP
protocol.
63) Port Service
(Available for Custom Security only.) The Custom IP protocol’s destination port (port field
in the IP header)