Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 235)

Setting the System Date and Time
Page 9-13
46) DST End Week
Indicates which week in a month DST ends. To set the week DST should end, enter the
sequential number of the week. The possible values are 1st (1), 2nd (2), 3rd (3), 4th (4), and
Last. For example, if you want
DST to end on the last Tuesday of a month, you would enter
the line number for DST End Week ( 46 ) and the week, as follows:
46=Last
47) DST End Day
Indicates which day of the week DST ends. To set the day DST should end, enter the sequen-
tial number of the day (Sunday=1, Monday=2, . . . Saturday=7). For example, if you want DST
to end on Wednesday, you would enter the line number for DST End Day ( 47 ) and the day, as
follows:
47=4
48) DST End Time
Indicates what time of day (in local time) DST ends. To set the time DST should end, enter the
time in the form of HH:MM , where HH is the clock hours of a 24 hour (military) clock and MM
is the clock minutes that DST should end. For example, if you want DST to end at 2:00 a.m.,
you would enter the line number for DST End Time ( 48 ) and the time, as follows:
48=2:00
49) DST Offset
Indicates the amount of time to change the local time when DST changes. To set how much
time DST should change, enter the change in the form of HH:MM , where HH is the clock hours
and MM is the clock minutes that DST should change. For example, if you want the local time
to move 1 hour when DST changes, you would enter the line number for DST Offset and the
hour, as follows:
49=1:00