Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 288
NTP Configuration Menu
Page 12-10
2. Adjust the configurable variables for this
NTP
client as needed by entering the line
number, and equal sign, and a new value at the system prompt, as shown:
<lineNumber>=<value>
For example, to change the
Response timeout
to 10, you would enter
1
(the line number
for
Response timeout
), an equal sign (
=
), and the number
10
(the new value), as shown:
1=10
3. Enable authentication by entering a
3
, and equal sign (=), and a key file name at the
prompt, as shown:
3=ntp.keys
The
NTP
Startup Configuration menu expands to display new options. The menu now
appears similar to the following:
NTP Startup Configuration
1) Response timeout
: 0
2) Authentication delay
: No
3) Authentication key file name
: ntp.keys
31) Configuration info authentication key
:
32) Control request authentication key
:
33) Configuration change authentication key
:
4) NTP client mode
: Ucast
5) Enable monitor
: No
6) Enable NTP server
: No
4. Adjust the configurable variables for authentication as needed by entering the line
number, and equal sign, and a new value at the system prompt, as shown:
<lineNumber>=<value>
For example, to change the
Configuration info authentication key
to 10, you would enter
1
(the line number for
Configuration info authentication key
), an equal sign (
=
), and the
number
10
(the new value), as shown:
1=10