Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 41)

Omni Switch/Router Chassis and Power Supplies
Page 1-11
The OmniS/R-5 provides bays for two power supplies. The power supplies are self-enclosed
to allow safe hot-insertion and hot-removal. When two power supplies are installed, they
share the electrical load. If one should fail, the remaining power supply automatically takes
up the load without any disruption to the operation. See Chapter 1, “Omni Switch/Router
Chassis and Power Supplies,” for more information on installing and removing power
supplies. See OmniS/R-5 Technical Specifications on page 1-12 for more information.
The OmniS/R-5 uses one of the following power supplies:
OmniS/R-PS5-375 The standard power supply. It can provide 375 Watts of power.
OmniS/R-PS5-DC375 A -48 volt (input voltage) DC version of the OmniS/R-PS5-375 power
supply. This power supply can provide 375 Watts of power. It requires
the use of 12 to 14 gauge wire for connections to the DC power source.
See Connecting a DC Power Source to an OmniS/R-PS5-DC375 on page
1-24 for more information.
♦ Caution ♦
This unit may be equipped with two power connec-
tions. To reduce the risk of electrical shock, disconnect
both power connections before servicing the unit.
♦ VORSICHT ♦
Das Gerat kann mit zwei Netzanschlussen ausgestattet
sein. Um einen elektrischen Schlag zu vermeiden,
immer beide Anschlusse vor der Wartung vom Netz
trennen.