Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 746)

Viewing UDP Statistics and Errors
Page 25-24
Viewing UDP Statistics and Errors
The udps command is used to display a listing of UDP statistics and errors. The udps
command displays cumulative statistics since the last time the switch was powered on or
since the last reset of the switch was executed.
To display information about UDP statistics and errors, enter the following command:
udps
A screen similar to the following displays:
Total UDP datagrams received : 831
Total UDP datagrams transmitted : 22
Total Datagrams received w/unknown applications : 0
Total UDP datagrams w/other Errors : 0
The fields on this screen have the following meanings:
Total UDP datagrams received
The total number of UDP datagrams delivered to UDP applications.
Total UDP datagrams transmitted
The total number of UDP datagrams sent from this switch.
Total UDP datagrams received w/unknown applications
The total number of datagrams for which there was no application at the destination.
Total UDP datagrams w/other Errors
The total number of UDP datagrams that could not be delivered for reasons other than lack of
application at the destination.