Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 429)

OmniChannel
Page 15-15
3. A screen similar to the following displays:
Displaying channel 2
Channel Id
Phy. Port Port Status Mac Count
=====================================================================
2 5/6 Inactive 0
5/7 Inactive 0
3 5/3 Active 35
5/4 Active 34
5/5 Active 34
The following sections describe the variables in this table.
Channel Id . The identification number assigned to this OmniChannel during the crechnl
configuration procedure.
Phy. Port . The physical slot and port number for all ports included in the OmniChannel.
The slot number is listed first, then a slash (/), and the port number on the Ethernet
module.
Port Status . The current operational status of this physical port. If the port is Active , then a
cable is connected and data is capable of passing to and from the port. If the port is Inac-
tive , then a cable may not be attached or the port is inoperational for hardware or soft-
ware reasons.
Mac Count . The current number of MAC addresses that have been learned on this port. A
separate MAC count is given for each physical port in the OmniChannel.