Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 786)

Generic Service UDP Relay
Page 26-22
4. Enter d to return to the UDP Relay Configuration screen.
5. Enter s to save the changes and reinitialize the relay.
Deleting a Generic Service
To delete a generic service:
1. On the Generic Services Menu, enter 42 . The Configured Generic Services screen displays
similar to the following:
Configured Generic Services
Item State Port Number Description Servers/Vlans
(1) enabled 80 TFTP 198.172. 5. 4
Enter item number of service to be deleted [‘h’ for help/<ret> to exit] :
The parameters are defined in Modifying a Generic Service on page 26-21.
2. Enter the item number of the service you want to delete. A message similar to the follow-
ing displays:
Are you sure you want to delete item 1? [y/n] (n) :
3. Enter y to delete the service. The Configured Generic Services screen redisplays with the
State parameter changed to deleted . At this point, the service is marked for deletion but
has not actually been deleted from the configuration.
Configured Generic Services
Item State Port Number Description Servers/Vlans
(1) deleted 80 TFTP 198.172. 5. 4
Enter item number of service to be deleted [‘h’ for help/<ret> to exit] :
4. Select any other services to be marked for deletion. Press <Enter> to return to the Generic
Services Menu.
5. Enter q to return to the UDP Relay Configuration screen.
6. Enter s to save the changes and delete the selected service(s).