Gigabit ethernet modules, Gsx-k-fm/fs/fh-2w, Gigabit ethernet modules -12 – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual

Page 82: Gsx-k-fm/fs/fh-2w -12

Advertising
background image

Gigabit Ethernet Modules

Page 3-12

Gigabit Ethernet Modules

Gigabit Ethernet connections can be used as network backbones or in a wiring closet. The
following Omni Switch/Router Gigabit Ethernet modules are available:

GSX-K-FM/FS/FH-2W

Advanced switching module with two (2) Gigabit Ethernet back-

bone connections using fiber (

SC

) connectors.

This module is described and illustrated in the following sections.

Note

Wait at least five (5) seconds after a cable is pulled
from a

GSX

module before reinserting it. This will

prevent packets from being dropped.

GSX-K-FM/FS/FH-2W

The

GSX-K-FM/FS/FH-2W

Gigabit Ethernet backbone switching module contains two fiber SC

connectors that support two fully switched 1000Base-LX (long-distance fiber transmissions) or
1000Base-SX (short-distance fiber transmission ports). The

GSX-K-FM/FS/FH-2W

can be used as

a backbone connection in networks where Gigabit Ethernet is used as the backbone media.

The

GSX-K-FM/FS/FH-2W

can be factory configured with intermediate-reach single mode or

multimode fiber ports (see GSX-K-FM/FS/FH-2W Technical Specifications on page 3-13 for
more information). The intermediate-reach single mode version is referred to as the

GSX-K-FS-

2W

; the long-reach single mode version is referred to as the

GSX-K-FH-2W

; and the multimode

version is referred to as the

GSX-K-FM-2W.

The ports are color coded to differentiate the mode: multimode connectors are black, long-
haul single mode connectors are yellow, and intermediate-reach single mode connectors are
blue. (See Handling Fiber and Fiber Optic Connectors on page 3-10 for proper handling of

SC

connectors and fiber-optic cable.)

The

GSX-K-FM/FS/FH-2W

takes advantage of new Gigabit Ethernet/Fast Ethernet

ASIC

technol-

ogy known as “Kodiak.” This module provides 4 priority levels and 256 queues per Kodiak

ASIC

.

Note

Kodiak-based modules support up to 4 levels of prior-
ity (0-1, 2-3, 4-5, 6-7). This is not compatible with the
implementation of

VLAN

priority of Mammoth-based

modules. Kodiak based priority

VLANs

can only be

used with other Kodiak based priority

VLANs

.

With the optional

HRE-X

you can increase routing performance to 1.5 million packets per

second per module and up to 12 Mpps in a fully-loaded 9-slot chassis.

Advertising