Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 360)

Trap Tables
Page 13-40
Trap moduleResetReload
Object ID 1.3.6.1.4.1.800.3.1.1.4.0.17
Description The specified module has been either reset or reloaded. A reload may
occur during a firmware download.
Bit Position
(Word 1) 16
Hex Value
(Word 1) 1 0000
Trap Text
and
Variable
Descrip-
tions
Module reset or reloaded by chassis manager (slot 4 subunit 1 type 6 status 3)
Module Type . Indicates the module type that was reset or
reloaded. The following integers are valid values:
Submodule Type . Indicates the submodule that was reset or reloaded.
Typically this value will be 1, meaning the base module was reset or
reloaded. If this value is 2, then HSX module 1 was affected. If this
value is 3, then HSX module 2 was affected.
Operational State . Indicates the current state of the module that was reset or reload-
ed. The following integers are valid values:
1 Unknown state. The module may have failed low-level self-test.
2 Invalid. The module may exist, by the chassis does not have control of it.
3 Operational. The module is running fine with no errors.
4 Disabled. The module has been set to disable through the UI or SNMP.
5 Reset. The module has been reset.
6 Loading. The module is in the middle of loading.
7 Testing. The module is in self-test.
8 Warning. A warning was detected during operation.
9 Non-fatal error. A non-fatal error was detected during operation.
10 Fatal error. A fatal error occurred during operation. The module may or may
not be functional.
13 ESM 12-port 10BASE-T
14 ESM 6-port universal module
15 MPM version II
16 ATM DS-3
17 FSM FDDI single mode
18 ASM .5 MB single mode
19 ASM UTP
20 ESM 8-port fiber
21 ESM 12-port Telco
22 TSM fiber
23 ASM 2 MB multi-mode
24 ASM 2 MB single mode
4 HSM
5 MPM
6
ESM 8-port 10BASE-T
7 ESM 16-port
8 TSM 6-port UTP/STP
9 FSM FDDI module
10 FSM CDDI module
11 ESM 4-port
12 ASM .5 MB multi-mode
. Slot number. The slot number of the
module that was reset or reloaded.