Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 356)

Trap Tables
Page 13-36
Trap Type portRecordMismatch
Object ID 1.3.6.1.4.1.800.3.1.1.4.0.11
Description The port configuration is different from the previous configuration. Typi-
cally this trap is generated when a
NIC of one type is swapped for a dif-
ferent type (i.e., Ethernet for FDDI , ATM for Token Ring, etc.).
Bit Position
(Word 1) 10
Hex Value
(Word 1) 400
Trap Text
and
Variable
Descrip-
tions
Port configuration different than previously detected (slot 2, IF 2, type 203,
instance 1)
Slot number . The slot number for
the module that contains this port.
Port number . The port number on this
module that has a different configuration.
Port Type . The physical type of
this port. The following integers
are valid values:
1 Unknown
2 Other
3 Router
4 Bridge
5 Trunk
6 ATM trunk port
7 ATM LAN Emulation port
8 Classical IP
9 ATM MUX
203 Ethernet 10BASE-T
204 Ethernet 100BASE-T
205 Token Ring 4 mbs
206 Token Ring 16 mbs
207 FDDI
208 CDDI
209 ATM 25 mbs
210 ATM 50 mbs
211 DS-1
212 DS-3
213 OC-3
214 OC-12
215 OC-48
Physical Instance . The specific
instance of this slot/port/type.
In most cases this value will
be 1 (only one instance of the
port), but an ATM port may
have multiple instances. Pos-
sible values range from 1 to
254.