Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 330
Configuring SNMP Parameters and Traps
Page 13-10
Get Next Requests
The total number of
SNMP
Get-Next
PDUs
accepted and processed by the switch
SNMP
proto-
col entity.
Set Requests
The total number of
SNMP
Set-Request
PDUs
which have been accepted and processed by the
switch
SNMP
protocol entity.
Get Responses
The total number of
SNMP
Response
PDUs
accepted and processed by the switch
SNMP
proto-
col entity.
Authentication Trap Enables
Indicates whether the
SNMP
agent Enable process is permitted to generate authentication-fail-
ure traps. The value of this object overrides any configuration information, providing a means
to enable all authentication-failure traps.
Traps
The number of
SNMP
Trap
PDUs
generated by the
SNMP
protocol entity. Traps are broadcast
only.
Traps are broadcast only
This appears if traps are set to broadcast. The address is the broadcast address of the default
VLAN
of AutoTracker group 1.
Trap generation is ENABLED to these management stations
This appears if you have used the
snmpc
command to set up one or more management
stations to receive traps. The trap tables on the following pages list the traps that are currently
supported.