Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 869
The WAN Port Software Menu
Page 28-43
Frame Relay Example
In the following example, port 1 on slot 4 is configured for Frame Relay. To obtain status
information for this port, enter:
wpstatus 4/1
A screen similar to the following will be displayed:
This command displays three (3) layers of information. The top section provides information
on the physical interface. The middle section provides information on the logical, or Frame
Relay, interface. The bottom section provides information on the virtual circuits associated
with this physical port.
For detailed descriptions of the fields, refer to Chapter 29 “Managing Frame Relay.”
Frame Relay Status for slot 4, port 1:
Administrative/Operational Status ..................Up/Up
Port Type ........................................................Universal Serial Port
Protocol..........................................................Frame Relay
Speed
Intf.Receive
Receive
Receive
Transmit
Signal
BPS
Type
CRC Errors
Aborts
Overruns
Overruns
Errors
========
=======
=========== ========= =========
========= ========
2048000
V35DCE
0
0
0
0
0
Control
DTR
RTS
DSR
CTS
DCD
Signal
ON
ON
ON
ON
OFF
Frame Relay Information:
UniCast
Discarded Error
Octets
Frames
Frames
Count
=================== ======== ==========
IN
941079
0
0
Out
21334
0
0
IN+OUT
962413
0
0
Administrative/Operational Phase .... Up/Up
Last Error Type ......................................... No Error Since Reset
Last Error Time ......................................... 0 days, 00:00:00:00
Interface failures ...................................... 0
Last interface failure time ......................... 0 days, 00:00:00:00
DLCI Information:
Admin/
DLCI Oper
DLCI
Frames
Frames
Octets
Octets
Num Status Type
In
Out
In
Out
==== ====== ===========
========= ========== =========
========
0
UP/UP
Configured
1021
1021
16044
1494
31
UP/UP
Learned
17716
136
2746651
12663
32
UP/DN
Learned
0
0
0
0
Physical Level
Information.
Logical (Frame
Relay) Infor-
mation
Virtual Circuit
Level
Information
Displays for
serial ports
only
Applicable
to all port
types.