Altera 10-Gbps Ethernet MAC MegaCore Function User Manual

Page 138

Advertising
background image

Chapter 9: Interface Signals

9–19

February 2014

Altera Corporation

10-Gbps Ethernet MAC MegaCore Function User Guide

avalon_st_tx_pfc_gen_data[]

(1)

Input

4-16

The signal width is determined by the Number of PFC
priorities
parameter, n = 2 x number priority queues
enabled.

Bit 0: Set this bit to 1 to trigger an XON request for
priority queue 0.

Bit 1: Set this bit to 1 to trigger an XOFF request for
priority queue 0.

Bit 2: Set this bit to 1 to trigger an XON request for
priority queue 1.

Bit 3: Set this bit to 1 to trigger an XOFF request for
priority queue 1.

Bit 4:Set this bit to 1 to trigger an XON request for
priority queue 2.

Bit 5: Set this bit to 1 to trigger an XOFF request for
priority queue 2.

Bit 6: Set this bit to 1 to trigger an XON request for
priority queue 3.

Bit 7: Set this bit to 1 to trigger an XOFF request for
priority queue 3.

Bit 8: Set this bit to 1 to trigger an XON request for
priority queue 4.

Bit 9: Set this bit to 1 to trigger an XOFF request for
priority queue 4.

Bit 10: Set this bit to 1 to trigger an XON request for
priority queue 5.

Bit 11: Set this bit to 1 to trigger an XOFF request for
priority queue 5.

Bit 12: Set this bit to 1 to trigger an XON request for
priority queue 6.

Bit 13: Set this bit to 1 to trigger an XOFF request for
priority queue 6.

Bit 14: Set this bit to 1 to trigger an XON request for
priority queue 7.

Bit 15: Set this bit to 1 to trigger an XOFF request for
priority queue 7.

If you simultaneously assert both bits corresponding to
priority queue n, neither the XOFF request nor the XON
request is generated.

avalon_st_tx_pause_length_data[]

Input

16

This signal is present only in the MAX TX only variation.

Specifies the pause duration when a pause frame is
received on the TX path. The pause length is in unit of
pause quanta, where 1 pause length = 512 bits time.

avalon_st_tx_pause_length_valid

Input

1

This signal is present only in the MAX TX only variation.

When asserted, this signal qualifies the data on the
avalon_st_tx_pause_length_data

bus.

Table 9–9. Avalon-ST Flow Control Signals (Part 2 of 3)

Signal

Direction

Width

Description

Advertising