C.2.4. control insert signals, C.2.5. timestamp field location signals – Altera 10-Gbps Ethernet MAC MegaCore Function User Manual

Page 165

Advertising
background image

C–4

Appendix C: Packet Classifier

10-Gbps Ethernet MAC MegaCore Function User Guide

February 2014

Altera Corporation

C.2.4. Control Insert Signals

Table C–5

describes the control insert signals for the Packet Classifier. These signals

must be aligned to the start of a packet

.

C.2.5. Timestamp Field Location Signals

Table C–6

describes the timestamp field location signals for the Packet Classifier.

These signals must be aligned to the start of a packet

.

tx_etstamp_ins_ctrl_in_residence_time

_calc_format

Input

1

Format of the timestamp to be used for
calculating residence time. This signal must be
aligned to the start of an incoming packet.

A value of 0 indicates 96 bit timestamp format
while 1 indicates 64 bit timestamp format.

tx_etstamp_ins_ctrl_out_residence_tim

e_calc_format

Output

1

Format of the timestamp to be used for
calculating residence time. This signal must be
aligned to the start of an outgoing packet.

A value of 0 indicates 96 bit timestamp format
while 1 indicates 64 bit timestamp format.

Table C–4. Ingress Control Signals for the Packet Classifier (Part 2 of 2)

Signal

Direction

Width

Description

Table C–5. Control Insert Signals for the Packet Classifier

Signal

Direction

Width

Description

tx_etstamp_ins_ctrl_out_checksum_zero

Output

1

Assert this signal to set the checksum field.

tx_etstamp_ins_ctrl_out_checksum_corr

ect

Output

1

Assert this signal to correct the packet
checksum by updating the checksum correction
specified by
tx_etstamp_ins_ctrl_out_offset_check

sum_correction

.

tx_etstamp_ins_ctrl_out_timestamp_for

mat

Output

1

The timestamp format of the frame where the
timestamp is inserted.

tx_etstamp_ins_ctrl_out_timestamp_ins

ert

Output

1

Assert this signal to insert timestamp into the
associated frame.

tx_etstamp_ins_ctrl_out_residence_tim

e_update

Output

1

Assert this signal to add the residence time into
the correction field of the PTP frame.

Table C–6. Timestamp Field Location Signals for the Packet Classifier

Signal

Direction

Width

Description

tx_etstamp_ins_ctrl_out_offset_timest

amp

Output

16

Indicates the location of the timestamp field.

tx_etstamp_ins_ctrl_out_offset_correc

tion_field

Output

16

Indicates the location of the correction field.

tx_etstamp_ins_ctrl_out_offset_checks

um_field

Output

16

Indicates the location of the checksum field.

tx_etstamp_ins_ctrl_out_offset_checks

um_correction

Output

16

Indicates the location of the checksum
corrector field.

Advertising