10gbe mac design examples, Software and hardware requirements, Chapter 3. 10gbe mac design examples – Altera 10-Gbps Ethernet MAC MegaCore Function User Manual

Page 19: Software and hardware requirements –1

Advertising
background image

February 2014

Altera Corporation

10-Gbps Ethernet MAC MegaCore Function User Guide

3. 10GbE MAC Design Examples

You can use the following 10GbE design examples and testbenches to help you get
started with the 10GbE MAC IP core and use the core in your design:

10GbE MAC with XAUI PHY

10GbE MAC with 10GBASE-R PHY

1

XAUI PHY and 10GBASE-R PHY do not support Stratix III devices.

3.1. Software and Hardware Requirements

Altera uses the following hardware and software to test the 10GbE design examples
and testbenches:

Quartus II software 13.1

Stratix IV GX FPGA development kit (for XAUI PHY)

Transceiver Signal Integrity development kit, Stratix IV GT Edition (for
10GBASE-R PHY)

ModelSim

®

-AE 6.6c, ModelSim-SE 6.6c or higher

f

For more information on the development kits, refer to the following documents:

Stratix IV GX Development Kit User Guide

Stratix IV GX Development Kit Reference Manual

Transceiver Signal Integrity Development Kit, Stratix IV GT Edition User Guide

Transceiver Signal Integrity Development Kit, Stratix IV GT Edition Reference Manual

Advertising