Release information, Release information –2 – Altera 10-Gbps Ethernet MAC MegaCore Function User Manual

Page 8

Advertising
background image

1–2

Chapter 1: About This IP Core

Release Information

10-Gbps Ethernet MAC MegaCore Function User Guide

February 2014

Altera Corporation

Optional cyclic redundancy code (CRC)-32 computation and insertion on the
transmit datapath; CRC checking on the receive datapath with optional
forwarding of the frame check sequence (FCS) field to the client application.

Checking of receive frames for FCS error, undersized and oversized frames, and
payload length error.

Deficit idle counter (DIC) for optimized performance with average inter-packet
gap (IPG) of 12 bytes for LAN applications.

Optional statistics collection on the transmit and receive datapaths.

Packets termination when the transmit datapath receives incomplete packets.

Programmable maximum length of transmit and receive frames up to
64 Kbytes (KB).

Programmable promiscuous (transparent) mode.

Optional Ethernet flow control and priority-based flow control (PFC) using pause
frames with programmable pause quanta. The PFC supports up to 8 priority
queues.

Optional padding termination on the receive datapath and insertion on the
transmit datapath.

Design examples with optional loopback and testbench for design verification.

Optional preamble passthrough mode on the transmit and receive datapaths. The
preamble passthrough mode allows you to define the preamble in the client frame.

Programmable datapath option to allow separate instantiation of MAC TX block,
MAC RX block, or both MAC TX and MAC RX blocks.

Optional IEEE 1588v2 feature for the following configurations:

10GbE MAC with 10GBASE-R PHY MegaCore function

1G/10GbE MAC with Backplane Ethernet 10GBASE-KR PHY MegaCore
function

Multi-speed 10M-10GbE MAC with Backplane Ethernet 10GBASE-KR PHY
MegaCore function

1.2. Release Information

Table 1–1

lists information about this release of the 10GbE MAC IP core.

Table 1–1. Release Information

Item

Description

Version

13.1

Release Date

November 2013

Ordering Code

IP-10GETHMAC

Product ID

ID 00D9

Vendor ID

6AF7

Advertising