H3C Technologies H3C Intelligent Management Center - Manual (Page 110)

101
Viewing the topology and details of an SPB service
1. From the navigation tree, select Service > VAN Fabric Manager > LAN Configuration > SPB.
2. Click the SPB Services tab.
3. Click an SPB service name in the SPB Service List.
A page appears displaying the topology, configuration, and AC list for the SPB service.
Topology
The SPB topology shows the shortest path tree for the SPB service. In the topology, BEBs are
identified with the device icon
, and BCBs are identified with the device icon that does not
have a letter E.
SPB Service Configuration
{
Service Name—SPB service name.
{
VSI Name—VSI name of the SPB service.
{
I-SID—I-SID assigned to the SPB VSI. In an SPB network, an I-SID uniquely identifies one SPB
service.
{
Multicast Replication Mode—Replication mode for multi-destination traffic, including
broadcast, multicast, and unknown unicast. Available options include transport replication
(also called "tandem replication"), and head-end replication.
{
Audit Interval (hours)—SPB service audit interval.
{
B-VLAN ID—B-VLAN used for transporting customer traffic assigned to SPB VSIs. You can
assign a B-VLAN to multiple SPB VSIs.
{
ECT Index—ECT algorithm index mapped to the B-VLAN. To forward traffic to each other in a
B-VLAN, SPB devices must have the same B-VLAN ID to ECT algorithm index mapping.
AC List
{
Device Name—BEB to which the AC is attached. By default, this field displays the device label
and the device IP address. The device label is assigned in the IMC Platform. The device IP
address is the IP address used when the device was added to the IMC Platform. For more
information about device details, see H3C IMC Base Platform Administrator Guide.
{
Interface Description—Interface type and number of the interface that is connected to the AC.
{
Service Instance—ID of the Ethernet service instance on the interface. A service instance
identifies a category of incoming customer traffic. The traffic matching criteria are specified by
Encapsulation Type and Encapsulation VLAN fields.
{
Encapsulation Type—Customer traffic encapsulation matching criteria. For more information,
see
Table 6 .
{
Encapsulation VLAN—Outer VLANs assigned to the service instance. This field contains
VLANs when Encapsulation Type is SVLAN ID List or Tagged SVLAN ID List. This field is empty
when Encapsulation Type is not SVLAN ID List or Tagged SVLAN ID List.
{
Customer Site Name—Customer site to which the AC is connected.
Adding SPB services
You must add an SPB service before you can deploy it to the SPB network.
To add an SPB service: