To add zones to a zone set, To delete zones from a zone set, Managing the active zone set – H3C Technologies H3C Intelligent Management Center User Manual
Page 72: Managing the active, Zone set
63
To add zones to a zone set:
1.
Use one of the following methods to access the zone list:
{
In the zone set list, click the target zone set name.
{
In the fabric resources tree, click Fabric Management > the target fabric name > the target
VSAN name > Zone Sets > the target zone set name.
2.
In the zone list area, click Add.
The Zone List displays all zones that are not members of the zone set.
3.
Query the zones by name.
The Name field supports fuzzy matching.
4.
From the Zone List, select one or more zones.
5.
Click OK.
To delete zones from a zone set:
1.
Use one of the following methods to access the zone list:
{
In the zone set list, click the target zone set name.
{
In the fabric resources tree, click Fabric Management > the target fabric name > the target
VSAN name > Zone Sets > the target zone set name.
2.
From the zone list, select one or more zones.
3.
Click Delete.
A confirmation dialog box appears.
4.
Click OK.
Managing the active zone set
When a VSAN contains an active zone set, the fabric resources tree displays the Active Zone Set node
under the VSAN node.
Figure 15 Active zone set