H3C Technologies H3C Intelligent Management Center - Manual (Page 31)

22
3. Click OK.
Managing servers
Viewing the server list
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > DC Management.
3. In the DC list, Click the name of a DC.
The details page appears.
4. Click the Servers tab.
Server list buttons
{
Import Devices—Import one or more servers from the IMC Platform to a DC. The server list
displays the imported servers. For more information, see "
Importing a server ."
{
Synchronize—Synchronize the settings of the servers into VFM. For more information, see
"
Synchronizing settings of a server into VFM ."
{
Delete—Delete a server from the server list. For more information, see " Deleting a server ."
{
Refresh—Refresh and obtain the most recent server list.
Server list contents
{
Status—Alarm status (alarm status on the IMC Platform) of the server. For more information, see
H3C IMC Base Platform Administrator Guide.
{
Device Name—Name of the server. The server name field displays server label + server IP by
default. The label and IP address of the server are available on the IMC Platform. Click the
name to view its details. For more information, see H3C IMC Base Platform Administrator
Guide.
NOTE
To change the device name format, select System > System Configuration > System Settings,
and then change the setting for Device Info Display.
{
Device IP—IP address of the server.
{
Last Sync—Time of the most recent synchronization.
{
Sync Status—Result of the most recent synchronization, including Success, Failure, and
Synchronizing.
{
View VMs—When the View VMs field displays , the server contains no VM. When the View
VMs field displays , click to view the VM list of the server. For more information, see
" Viewing VMs ."
Viewing server details
In the server list, click the name of a server to view its details page on the IMC Platform. For more
information, see H3C IMC Base Platform Administrator Guide.