H3C Technologies H3C Intelligent Management Center - Manual (Page 40)

31
{
Level 4 menu—Zone-related elements, devices, and tasks in the VSAN, including zone
topology, global zone configuration, active zone set, zone sets, zones, and zone aliases,
switches, servers, storage devices, FC ping tasks, and FC tracert tasks.
− Zone Topology—Click it to display the zone topology in the right pane.
− Global Zone Configuration—Click it to display the global zone configuration in the right
pane.
− Active Zone Set—Click it to display in the right pane the active zone set in the VSAN and
the zones in the active zone set. If the VSAN has no active zone set, this option does not
appear.
− Zone Sets—Click it to display the zone set list in the right pane.
− Zones—Click it to display the zone list in the right pane.
− Zone Aliases—Click it to display the zone alias list in the right pane.
− Switches—All FCoE switches in the VSAN.
− Servers—All servers in the VSAN.
− Storage—All storage devices in the VSAN.
− FC Ping—Click it to display the FC ping task list in the right pane.
− FC Tracert—Click it to display the FC tracert task list in the right pane.
NOTE:
If a type of element does not exist in the VSAN, the corresponding level-4 menu does not appear.
{
Level 5 menu—All level-4 menus except the zone topology and global zone configuration
have level-5 menus.
− Level 5 menus under the active zone set—Each level-5 menu is a zone contained in the
active zone set. Click it to display detailed information about the zone in the right pane.
− Level 5 menus under the zone sets—Each level-5 menu is a zone set. Click it to display the
zone list in the right pane.
− Level 5 menus under the zones—Each level-5 menu is a zone. Click it to display the zone
member list in the right pane.
− Level 5 menus under the zone aliases—Each level-5 menu is a zone alias. Click it to
display the zone member list in the right pane.
− Level 5 menus under the switches—Each level-5 menu is an FCoE switch. Click it to display
detailed information about the FCoE switch in the right pane.
− Level 5 menus under the servers—Each level-5 menu is a server. Click it to display detailed
information about the server in the right pane.
− Level 5 menus under the storage devices—Each level-5 menu is a storage device. Click it to
display detailed information about the storage in the right pane.
Viewing the fabric list
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration Manager > Fabric
Management. The fabric resources tree is in the left pane of the Fabric Management page, and
the fabric list is in the right.
Fabric list buttons
{
Add—Click this button to add a fabric (see " Adding a fabric ").