H3C Technologies H3C Intelligent Management Center - Manual (Page 118)

109
− Device IP—Enter a partial or complete IP address.
− Interface Description—Enter a partial or complete interface description.
− Customer Site Name—Enter a partial or complete customer network name.
− SPB Service—Enter a partial or complete SPB service name.
Empty fields are ignored.
The AC List displays all ACs that match the query criteria.
Viewing AC details
1. From the navigation tree, select VAN Fabric Manager > LAN Configuration > SPB.
2. On the AC List tab, click the View Details icon in the Details column for an AC.
The AC details page displays information about the BEB device, customer site name, and the SPB
service for the AC. If customer traffic matches the Ethernet service instance on the AC, the BEB
uses the SPB service associated with the Ethernet service instance to provide forwarding services.
{
BEB device information:
− Device Name—BEB to which the AC is attached. By default, this field displays the device
label and the device IP address. The device label is assigned in the IMC Platform. The
device IP address is the IP address used when the device was added to the IMC Platform.
For more information about device details, see H3C IMC Base Platform Administrator
Guide.
− Interface Description—Interface type and number of the interface that is connected to the
AC.
− Service Instance—ID of the Ethernet service instance on the interface. A service instance
identifies a category of incoming customer traffic. The traffic matching criteria are specified
by Encapsulation Type and Encapsulation VLAN fields.
− Encapsulation Type—Customer traffic encapsulation matching criteria. For more
information, see
Table 6 .
− Encapsulation VLAN—Outer VLANs assigned to the service instance. This field contains
VLANs when Encapsulation Type is SVLAN ID List or Tagged SVLAN ID List. This field is
empty when Encapsulation Type is not SVLAN ID List or Tagged SVLAN ID List.
{
Customer site name:
Name of the customer site connected through the AC to the BEB. The customer site name only
identifies a customer site in the topology diagram. It is not used for any other purposes.
{
SPB service information:
− Service Name—SPB service name.
− VSI Name—SPB VSI name automatically assigned to the SPB service when it was created.
VSI name uses the imc_spb_isid_+I-SID format.
− I-SID—I-SID assigned to the SPB VSI. In an SPB network, an I-SID uniquely identifies one
SPB service.
− B-VLAN—B-VLAN used for transporting customer traffic assigned to SPB VSIs. You can
assign a B-VLAN to multiple SPB VSIs.
− ECT Index—ECT algorithm index mapped to the B-VLAN. To forward traffic to each other in
a B-VLAN, SPB devices must have the same B-VLAN ID to ECT algorithm index mapping.