Querying devices, Viewing device details, Viewing spbm configuration – H3C Technologies H3C Intelligent Management Center User Manual
Page 99
90
Querying devices
1.
Access the device list page.
2.
Use one of the following methods:
{
To perform a quick query, enter a partial or complete device label in the query field, and click
the Query icon
.
{
To perform an advanced query, click the Expand icon
next to the query field, specify
query criteria, and then click Query.
Query criteria include the following items:
−
Device Label—Enter a partial or complete SPB device label.
−
Device IP—Enter a partial or complete IP address.
−
Status—Select a device state from the list. Available states include All, Unmanaged,
Unknown, Normal, Warning, Minor, Major, and Critical.
Empty fields are ignored.
The device list displays all SPB devices that match the query criteria.
Viewing device details
In the device list, click a device name to view detailed information about the device. For more
information about device details, see H3C IMC Base Platform Administrator Guide.
Viewing SPBM configuration
1.
From the navigation tree, select Service > VAN Fabric Manager > LAN Configuration > SPB.
2.
Click the Device Management tab.
3.
Click the Operation icon
for the target SPB device.
4.
Select View Device Config.
The device configuration page appears. This page includes these tabs: B-VLAN Info, VSI Info,
and AC Info. By default, B-VLAN Info is displayed.
B-VLAN Info
{
Refresh—Click this link to refresh B-VLAN information.
{
B-VLAN ID—B-VLAN used for transporting customer traffic assigned to SPB VSIs. You can
assign a B-VLAN to multiple SPB VSIs.
{
ECT Index—ECT algorithm index mapped to the B-VLAN. To forward traffic to each other in a
B-VLAN, SPB devices must have the same B-VLAN ID to ECT algorithm index mapping.
{
Modify—Click the Modify icon to map the B-VLAN to a new ECT algorithm index. The
value range for the ECT algorithm index is 1 to 16.
VSI Info
{
Refresh—Click this link to refresh SPB VSI information.
{
VSI Name—SPB VSI name automatically assigned to the SPB service when it was created. VSI
name uses the imc_spb_isid_+I-SID format.
{
I-SID—Service instance identifier that uniquely identifies the SPB service.