Viewing fcoe switch details, Fcoe switch – H3C Technologies H3C Intelligent Management Center User Manual
Page 44
35
NOTE:
The name of an FCoE switch is the label plus the IP address of the FCoE switch and does not serve as
a query criterion.
2.
Click Query to display all FCoE switches that match the query criteria.
Viewing FCoE switch details
In the FCoE switch list, click an FCoE switch name to view the FCoE switch details. For more information,
see H3C IMC Base Platform Administrator Guide.
Viewing basic information and interface information of an FCoE switch
1.
In the FCoE switch list, click the Details link
for the FCoE switch.
Basic information
Basic information on the top part of the page includes the following:
{
Status—Alarm state in the IMC Platform for the FCoE switch.
{
Name—Device label in the IMC Platform for the FCoE switch.
{
IP Address—IP address the FCoE switch uses when it is added to the IMC Platform.
{
Device Model—Model of the FCoE switch.
{
WWN—WWN of the FCoE switch. The WWN is factory assigned.
{
Disruptive Load Balancing—This field appears only when you access the Switch page from the
fabric resources tree. For more information, see "
Initiating a disruptive load-balancing
."
CEE interfaces
The Converged Enhanced Ethernet (CEE) is enhancement and expansion of traditional Ethernet
local area networks for use in data centers. CEE interfaces are Ethernet interfaces that are
configured with DCBX parameters. They are connected to servers.
You can perform the following operations for CEE interfaces in VFM:
{
Viewing CEE interfaces (see "
").
{
Querying CEE interfaces (see "
").
{
Enabling or disabling CEE interfaces (see "
Enabling or disabling CEE interfaces
").
{
Viewing and comparing DCBX parameters of CEE interfaces (see "
the interface DCBX parameters on a CEE interface and in
").
{
Deploying DCBX parameters to CEE interfaces (see "
Deploying DCBX parameters to CEE
").
{
Undeploying DCBX parameters from CEE interfaces (see "
Undeploying DCBX parameters from
").
VFC interfaces
VFC interfaces are logical interfaces that are created on FCoE switches. A VFC interface can
connect to a server, storage device, or FCoE switch.
You can perform the following operations for VFC interfaces in VFM:
{
Viewing VFC interfaces (see "
").
{
Querying VFC interfaces (see "
").
{
Viewing VFC interface details (see "
").