Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 109)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 109
Before the client can receive the event information from the device, you need to enable the events of the
resource and arm the device first. For details, refer to Enable Receiving Event from Devices .
7.10.1 Enable Receiving Event from Devices
Before the client software can receive event notifications from the device, you need to arm the device first.
1. Click → Tool → Device Arming Control to open Device Arming Control page. All the added devices
appear on this page.
2. In the Auto-Arming column, turn on the switch to enable auto-arming.
Figure 7-8 Arm Device
After turning on, the device(s) will be armed, and notifications about the events triggered by the armed
device(s) will be automatically sent to the client software in real-time.
7.10.2 View Real-Time Events
The real-time event information received by the client of the connected resources are displayed. You can
check the real-time event information, including event source, event time, priority, etc.
Before You Start
Enable receiving events from devices before the client can receive event from the device, see Enable
Receiving Event from Devices for details.
1. Click Event Center → Real-time Event to enter the real-time event page and you can view the real-time
events received by the client.
• Event Time – For encoding device, event time is the client time when it receives the event. For other
device types, event time is the time when the event is triggered.
• Priority – Priority represents the emergency degree of the event.
2. Filter the events.
• Filter by Device Type and (or) Priority – Select device type(s) and (or) priorities to filter events.
• Filter by Keywords – Enter the keywords to filter the events.
3. (Optional): Right-click the table header of the event list to customize the event related items to be