Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 74)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 74
NOTE: Enter the person’s basic information first. For details about configuring person’s basic
information, refer to Configure Basic Information .
3. In the Credential → Card area, click + .
4. Click Settings to enter the Settings page.
5. Select Local as the card issuing mode.
Figure 49, Issue a Card by Local Mode
6. Set other related parameters.
• Card Enrollment Station – Select the model of the connected card enrollment station.
NOTE: Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-
M, DS-K1F100-D8E, and DS-K1F180-D8E.
• Card Type – This field is available only when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the
card type as EM card or Mifare card according to the actual card type.
• Buzzing – Enable or disable the buzzing when the card number is read successfully.
• Card No. Type – Select the type of the card number according to actual needs.
• M1 Card Encryption – This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or
DS-K1F180-D8E. If the card is M1 card, then you can enable the M1 Card Encryption function and select