Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 73)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 73
3. Create a name for the added organization.
NOTE: Up to 10 levels of organizations can be added.
4. (Optional): Perform the following operation(s).
• Edit Organization – Hover the mouse on an added organization and click to edit its name.
• Delete Organization – Hover the mouse on an added organization and click to delete it.
NOTE: The lower-level organizations will be deleted as well if you delete an organization.
Make sure there is no person added under the organization, or the organization cannot be
deleted.
• Show Persons in Sub Organization – Check Show Persons in Sub Organization and select an
organization to show persons in its sub organizations.
7.4.2 Configure Basic Information
You can add person to the client software one by one and configure the person’s basic information such as
name, gender, phone number, etc.
1. Enter Person module.
2. Select an organization in the organization list to add the person.
3. Click Add to open the adding person window. The Person ID will be generated automatically.
4. Enter the basic information including person name, gender, tel, email address, etc.
5. (Optional): Set the effective period of the person. Once expired, the credentials and access control settings
of the person will be invalid and the person will have no authorization to access the doors\floors.
Example: For example, if the person is a visitor, his/her effective period may be short and temporary.
6. Confirm to add the person.
• Click Add to add the person and close the Add Person window.
• Click Add and New to add the person and continue to add other persons.
7.4.3 Issue a Card by Local Mode
If a card enrollment station is available, you can issue a card by local mode. To read the card number, you
should connect the card enrollment station to the PC running the client by USB interface or COM, and place
the card on the card enrollment station.
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add to enter Add Person panel.