Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 80)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 80
NOTE: If the person has multiple cards, separate the card No. with semicolon.
Items with asterisk are required.
By default, the Hire Date is the current date.
7. Click to select the CSV file with person information.
8. Click Import to start importing.
NOTE: If a person No. already exists in the client’s database, delete the existing information before
importing.
You can import information of no more than 10,000 persons.
7.4.13 Import Person Pictures
After importing identity pictures for the added persons to the client, the persons in the pictures can be
identified by an added temperature screening terminal. You can either import person pictures one by one, or
import multiple pictures at a time according to your need.
Before You Start
Be sure to have imported person information to the client beforehand.
1. Enter the Person module.
2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and
then select it.
3. Click Import to open the Import panel and check Face .
4. (Optional): Enable Verify by Device to check whether identity recognition device managed in the client can
recognize the identity in the photo.
5. Click to select a identity picture file.
NOTE: The (folder of) identity pictures should be in ZIP format.
Each picture file should be in JPG format and should be no larger than 200 KB.
Each picture file should be named as “Person ID_Name.” The Person ID should be the same
with that of the imported person information.
6. Click Import to start importing. The importing progress and result will be displayed.
7.4.14 Export Person Information
You can export the added persons’ information to local PC as a CSV file.
Before You Start
Make sure you have added persons to an organization.