Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 47)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 47
NOTE: For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint .
For detailed information about authenticating identity, see Tips When Collecting/Comparing
Identity Picture .
If authentication succeeds, an “Authenticated” prompt will pop up.
6.6.2 Authenticate via Single Credential
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Authenticate Identity or Card
• Face – Face forward at the camera and start authentication via face.
• Card – Present the card on the card presenting area and start authentication via card.
NOTE: The card can be a normal IC card or encrypted card.
If authentication completed, an “Authenticated” prompt will pop up.
6.7 System Settings
On the System Settings page, you can set the system basic parameters, the identity parameters, upgrade the
firmware, and reboot the device.
6.7.1 Set Basic Parameters
You can set community no., building no., unit no., voice prompt, voice volume, application, and language.
On the Home page, tap System (System Settings) to enter the System Settings page.