Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 66)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 66
8. (Optional): Check Import to Group to create a group by the device name, and import all the channels of
the device to this group.
Example: For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9. Click Add to add the devices.
Add Device by IP Address or Domain Name
If you know the IP address or domain name of the device to add, you can add devices to the client by
specifying the IP address (or domain name), user name, password, etc.
1. Enter Device Management module.
2. Click Device tab on the top of the right panel. The added devices are displayed on the right panel.
3. Click Add to open the Add window, and then select IP/Domain as the adding mode.
4. Enter the required information.
• Name – Create a descriptive name for the device. For example, you can use a nickname that can show the
location or feature of the device.
• Address – The IP address or domain name of the device.
• Port – The devices to add share the same port number. The default value is 8000 .
• User Name – Enter the device user name. By default, the user name is admin .
• Password – Enter the device password.
STRONG PASSWORD RECOMMENDED − The password strength of the device can be
automatically checked. We highly recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in high security systems, resetting the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end user.
5. (Optional): Check Transmission Encryption (TLS) to enable transmission encryption using TLS (Transport
Layer Security) protocol for security purpose.
NOTE: This function should be supported by the device.
If you have enabled Certificate Verification, you should click Open Certificate Directory to
open the default folder, and copy the certificate file exported from the device to this default
directory to strengthen the security. See for details about enabling certificate verification.