Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 59)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 59
Result
On the initial page and authenticate. If you do not select a status, the authentication will be marked as the
configured attendance status according to the schedule. If you tap Select Status and select a status to take
attendance, the authentication will be marked as the selected attendance status.
Example: If the Break Out Schedule is set as Monday 11:00, and the Break In Schedule is set as
Monday 12:00, the valid user’s authentication from Monday 11:00 to 12:00 will be marked
as a break.
6.11 View System Information
View device capacity, device information, the open source software license, and the device QR code.
• View Capacity – You can view the added user’s number, the identity picture’s number, the card’s number,
and the event’s number.
NOTE: Some device models do not support displaying the fingerprint capacity.
1. Tap Info. (System Information) → Capacity on the Home page to enter the Capacity page.
Figure 47, Capacity