Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 91)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 91
• Basic Information
­ Name – Edit the card reader name as desired.
­ Minimum Card Swiping Interval – If the interval between card swiping of the same card is less than
the set value, the card swiping is invalid. You can set it as 0 to 255.
­ Alarm of Max. Failed Attempts – Enable to report alarm when the card reading attempts reach the
set value.
­ Card Reader Type/Card Reader Description – Get card reader type and description. They are read-
only.
• Advanced
­ Enable Card Reader – Enable the function and e device can be used as an card reader.
­ OK LED Polarity/Error LED Polarity/Buzzer Polarity – Set OK LED Polarity/Error LED Polarity/Buzzer
LED Polarity of main board according to the card reader parameters. Generally, adopts the default
settings.
­ Max. Interval When Entering PWD – When you inputting the password on the card reader, if the
interval between pressing two digits is larger than the set value, the digits you pressed before will
be cleared automatically.
­ Tampering Detection – Enable the anti-tamper detection for the card reader.
­ Communicate with Controller Every – When the access control device cannot connect with the
card reader for longer than the set time, the card reader will turn offline automatically.
­ Face 1:N Matching Threshold – Set the matching threshold when authenticating via 1:N matching
mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate
when authentication.
­ Face Recognition Interval – The time interval between two continuous identity recognitions when
authenticating. By default, it is 2s.
­ Face Anti-spoofing – Enable or disable the live identity detection function. If enabling the function,
the device can recognize whether the person is a live one or not.
­ Face 1:1 Matching Threshold – Set the matching threshold when authenticating via 1:1 matching
mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate
when authentication.
­ Application Mode – You can select indoor or others application modes according to actual
environment.
­ Lock Authentication Failed Face – After enabling Live Face Detection, the system will lock user’s
identity for five minutes if the live identity detection fails for more than the configured attempts.
The same user cannot authenticate via the fake identity within five minutes. Within the five
minutes, the user can authenticate via the real identity twice continuously to unlock.