2 add identity picture – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual

Page 41

Advertising
background image

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual

UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA

41

NOTE:

Numbers, upper case letters, lower case letters, and special characters are allowed in the

user name.

Up to 32 characters are allowed in the user name.

5. (Optional): Add an identity picture, cards, or password for the administrator.

NOTE:

For details about adding an identity picture, see

Add Identity Picture

.

For details about adding a card, see

Add Card

.

For details about adding a password, see

Add Password

.

6. (Optional): Set the administrator’s authentication type.

NOTE:

For details about setting the authentication type, see

Set Authentication Mode

.

7. Enable the Administrator Permission function.

Administrator Permission

– The user is the administrator. Except for the normal attendance function,

the user can also enter the Home page to operate after authenticating the permission.

8. Tap

to save the settings.

6.4.2 Add Identity Picture

Add user’s identity picture to the device. And the user can use the identity picture to authenticate.

NOTE:

Up to 3000 identity pictures can be added.

1. Long tap on the initial page and login.

2. Tap

User

+

to enter the Add User page.

3. Edit the employee ID.

NOTE:

The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

The employee ID should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.

NOTE:

Numbers, upper case letters, lower case letters, and special characters are allowed in the

user name.

Up to 32 characters are allowed in the user name.

5. Tap the

Face Picture

field to enter the identity picture adding page.

Advertising