Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 7
DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
7
is not a malfunction however), and affecting the endurance of sensor at the same time.
•
Please use the provided glove when open up the device cover, avoid direct contact with the device cover,
because the acidic sweat of the fingers may erode the surface coating of the device cover.
•
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use
alkaline detergents.
•
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to
return the device to the factory with the original wrapper. Transportation without the original wrapper
may result in damage on the device and lead to additional costs.
•
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
•
Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a
higher security level, use multiple authentication modes.
Available Models
Product Name
Model
Touchless Identity Authentication Terminal
DS-K1T341BMI-T
DS-K1T341BMWI-T
Use only power supplies listed in the user instructions:
Model
Manufacturer
Standard
ADS-26FSG-12 12024EPG
Shenzhen Honor Electronic Co.,Ltd
PG
MSA-C2000IC12.0-24P-DE
MOSO Technology Co.,Ltd
PDE
ADS-26FSG-12 12024EPB
Shenzhen Honor Electronic Co.,Ltd
PB
ADS-26FSG-12 12024EPCU/EPC Shenzhen Honor Electronic Co.,Ltd
PCU
ADS-26FSG-12 12024EPI-01
Shenzhen Honor Electronic Co.,Ltd
PI
ADS-26FSG-12 12024EPBR
Shenzhen Honor Electronic Co.,Ltd
PBR
NOTE:
Make sure the power supply is used indoors, and the working temperature is between 32°
to 104° F (0° and 40° C).