Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 32)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 32
5.4 Activate Device via Client Software
For some devices, you are required to create the password to activate them before they can be added to the
software and work properly.
NOTE: This function should be supported by the device.
1. Enter the Device Management page.
2. Click on the right of Device Management and select Device .
3. Click Online Device to show the online device area. The searched for online devices are listed.
4. Check the device status (shown on Security Level column) and select an inactive device.
5. Click Activate to open the Activation dialog.
6. Create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED − The password strength of the device can be
automatically checked. We highly recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in high security systems, resetting the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end user.
7. Click OK to activate the device.