7 configure access control information – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 77
DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
77
7. Confirm to add the person.
•
Click
Add
to add the person and close the Add Person window.
•
Click
Add and New
to add the person and continue to add other persons .
7.4.7 Configure Access Control Information
When adding a person, you can set her/his access control properties, such as setting the person as a visitor or
a blocklist person, or as a super user who has super authorization.
1. Enter
Person
module.
2. Select an organization in the organization list to add the person and click
Add
.
3. In the
Access Control
area, set the person’s access control properties.
•
Access Group
– You can select one or more access groups for the person to give him/her the
authorization to the selected access points. For details, refer to
Set Access Group to Assign Access
•
Password
– The person must enter the password after swiping the card or fingerprint when accessing.
It cannot be used independently and should contain 4 to 8 digits.
•
Super User
– If the person is set as a super user, he/she will have authorization to access all the
doors/floors and will be exempted from remaining closed restrictions, all anti-passback rules, and first
person authorization.
•
Extended Door Open Time
– When the person accessing door, grant this person more time to pass
through doors which have been configured with extended open duration. Use this function for the
persons with reduced mobility.
NOTE:
For details about setting the door’s open duration, refer to
•
Add to Blocklist
– Add the person to the blocklist and when the person tries to access doors/floors, an
event will be triggered and send to the client to notify the security personnel.
•
Mark as Visitor
– If the person is a visitor, set the maximum times of authentications, including access
by card and fingerprint to limit the visitor’s access times.
NOTE:
The maximum times of authentications should be between 1 and 100.
•
Device Operator
– For person with device operator role, he/she is authorized to operate on the access
control devices.
NOTE:
The Super User, Extended Door Open Time, Add to Blocklist, and Mark as Visitor functions
cannot be enabled concurrently. For example, if one person is set as super user, you cannot
enable extended door open time for her/him, add her/him to the blocklist, or set her/him
as visitor.
4. Confirm to add the person.