Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 84)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 84
• Card Type – This field is available only when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the
card type as EM card or IC card according to the actual card type.
• Serial Port – It is available only when the model is DS-K1F100-M. Select the COM the card enrollment
station connects to.
• Buzzing – Enable or disable the buzzing when the card number is read successfully.
• Card No. Type – Select the type of the card number according to actual needs.
• M1 Card Encryption – This field is available only when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-
K1F180-D8E. If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should
enable this function and select the sector of the card to encrypt.
Remote Mode: Issue Card by Card Reader
Select an access control device added in the client and swipe the card on its card reader to read the card
number.
7.5 Configure Schedule and Template
You can configure the template including holiday and week schedule. After setting the template, you can
adopt the configured template to access groups when setting the access groups, so that the access group will
take effect in the time durations of the template.
NOTE: For access group settings, refer to Set Access Group to Assign Access Authorization to
Persons .
7.5.1 Add Holiday
You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in
one day.
NOTE: You can add up to 64 holidays in the software system.
1. Click Access Control → Schedule → Holiday to enter the Holiday page.
2. Click Add on the left panel.
3. Create a name for the holiday.
4. (Optional): Enter the descriptions or some notifications of this holiday in the Remark box.
5. Add a holiday period to the holiday list and configure the holiday duration.
NOTE: Up to 16 holiday periods can be added to one holiday.
1) Click Add in the Holiday List field.
2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access
group is activated.