Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 43)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 43
9. Enable or disable the Administrator Permission function.
• Enable Administrator Permission – The user is the administrator. Except for the normal attendance
function, the user can also enter the Home page to operate after authenticating the permission.
• Disable Administrator Permission – The User is the normal user. The user can only authenticate or take
attendance on the initial page.
10. Tap to save the settings.
6.4.3 Add Card
NOTE: Add a card for the user and the user can authenticate via the added card.
Up to 5000 cards can be added.
1. Long tap on the initial page and login.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. field and edit the employee ID.
NOTE: The employee ID should be less than 32 characters. It can be a combination of lower case
letters, upper case letters, and numbers.
The employee ID should not be duplicated.
4. Tap the Name field and input the user name on the soft keyboard.
NOTE: Numbers, upper case letters, lower case letters, and special characters are allowed in the
user name.
Up to 32 characters are allowed in the user name.
5. Tap the Card field and input the card No.
6. Configure the card No. Enter the card No. manually. Swipe the card over the card swiping area to get the
card No.
NOTE: The card No. cannot be empty.
Up to 20 characters are allowed in the card No.
The card No. cannot be duplicated.
7. Enable or disable the Administrator Permission function.
• Enable Administrator Permission – The user is the administrator. Except for the normal attendance
function, the user can also enter the Home page to operate after authenticating the permission.
• Disable Administrator Permission – The User is the normal user. The user can only authenticate or take
attendance on the initial page.