Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 33)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 33
Chapter 6 Basic Operation
6.1 Set Application Mode
After activating the device, you should select an application mode for better device application.
1. On the Welcome page, select Indoor or Others from the drop-down list.
Figure 26, Welcome Page
2. Tap OK to save.
NOTE: You can also change the settings in System Settings .
If you install the device indoors near the window or the identity recognition function is not
working well, select Others .
If you do not configure the application mode and tap Next , the system will select Indoor by
default.
If you activate the device via other tools remotely, the system will select Indoor as the