Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 19)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 19
Figure 6, Mounting Template
2. Drill holes on the wall or other surface according to the Hole 2 on the mounting template.
3. Align the holes to the mounting plate and secure the mounting plate on the wall with the 4 supplied
screws (KA4×22).
Figure 7, Install Mounting Plate
4. Remove the back sheet of the device with tools to display the wiring terminals.
5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external
devices’ cables.
6. Align the device with the mounting plate and hang the device on the mounting plate.