Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 96)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 96
5. Set the parity mode according to the property of the third party card reader.
NOTE: Up to 80 bits are allowed in the total length.
The odd parity start bit, the odd parity length, the even parity start bit and the even parity
length range from 1 to 80 bit.
The start bit of the card ID, the manufacturer code, the site code, and the OEM should
range from 1 to 80 bit.
6. Set output transformation rule.
1) Click Set Rule to open the Set Output Transformation Rules window.
Figure 53, Set Output Transformation Rule
2) Select rules on the left list. The selected rules will be added to the right list.
3) (Optional): Drag the rules to change the rule order.
4) Click OK .
5) In the Custom Wiegand tab, set the rule’s start bit, length, and the decimal digit.
7. Click Save .