FUJITSU SPARC M4000 - Manual (Page 10)

viii SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
4.4.2 System Power Off 4–10
4.4.3 Domain Power On 4–11
4.4.4 Domain Power Off 4–12
4.4.5 Sending a Domain Panic Request 4–14
4.4.6 Domain Reset 4–15
4.4.7 Sending a Break Signal to a Domain 4–16
4.4.8 Air-Conditioning Wait Time Administration 4–17
4.4.9 Warm-Up Time Administration 4–18
4.4.10 Shutdown Wait Time Administration 4–19
4.4.11 Dual Power Feed Administration 4–19
4.5 Identifying the Location of the System 4–21
4.6 Managing Fault Degradation 4–21
4.6.1 Displaying the Degraded Component 4–21
4.6.2 Clearing the Fault/Degradation Information 4–23
4.7 Changing the Time 4–23
4.8 Switching the XSCF Unit 4–23
4.9 Displaying State of an External I/O Expansion Unit and Administration
4–24
5. Overview of the XSCF Shell 5–1
5.1 Overview of the XSCF Command Shell 5–1
5.2 Login to XSCF User Accounts 5–7
5.2.1 Before Logging In 5–7
5.2.2 Operation From a Terminal Connected to the Serial Port 5–7
5.2.3 Operation for Connecting Via the XSCF-LAN (SSH) 5–8
5.2.4 Operation For Connecting Via the XSCF-LAN (Telnet) 5–9
5.3 View Server Status and Control Commands 5–10
5.4 Server Configuration Information Commands 5–12
5.5 Domain Control and Maintenance Commands 5–13