FUJITSU SPARC M4000 - Manual (Page 200)

3-10 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
c. Confirm that the XSCF Shell prompt (XSCF>) is displayed.
d. The XSCF Shell can now be used.
■
Connecting the domain console (OS console)
a. If the domain is powered off, use the poweron (8) command for the domain
on the XSCF Shell terminal and turn it on to start the OS.
b. Follow Step a to Step d in the above " Connecting the XSCF Shell terminal ."
c. Perform the console (8) command.
d. Confirm that the RW console or RO console window is displayed.
3.1.7 Switching Between the XSCF Shell and the
Domain Console
With a PC or workstation connected to an XSCF-LAN port or the serial port, the
XSCF Shell and domain console can be operated through one window exclusively.
The following is the switching procedure:
1. Perform the console (8) command on the XSCF Shell terminal screen to select
the domain console.
XSCF> console -d 0
Note – One RW console can be connected in one domain. If a user with platadm or
domainadm user privilege forcibly connects a RW console, the currently connected
RW console is disconnected.
2. To switch from the domain console to the XSCF Shell, press the escape
character, "#" (default value) and "." (sharp and period) keys while holding
down the <Enter> key.
3. Confirm that the XSCF Shell prompt (XSCF>) is displayed in the terminal.
4. To set a escape character different from the default value, perform the console
(8) command with specifying the option. It is enabled only at the current
session.
<Example> Change the escape character to |.
XSCF> console -d 0 -s “|”
Connect to DomainID 0?[y|n] :y