FUJITSU SPARC M4000 - Manual (Page 70)

2-14 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
2.2 Specifying the XSCF Settings
This section describes the XSCF settings in detail.
XSCF settings can be made in the following ways:
■ On the PC connected to the serial port, or you can specify the IP address of the
XSCF to establish a connection to the XSCF, and then use the XSCF Shell over an
Ethernet or a user LAN connection.
■ Specify the host name or the IP address of the XSCF in a web browser running on
a PC with an XSCF-LAN connection in order to establish a connection to the
XSCF, and then use the XSCF Web (see the following note).
Note – If the XSCF Web is not supported, or you want to set a function that is not
supported on the XSCF Web, use the XSCF Shell to make these settings. For the
support information, see the related documentation.
To describe the XSCF settings, each subsequent section is formatted as follows:
1. Each section first uses tables to explain terms, setting items, functions, and XSCF
Shell commands.
2. Each section then provides setting examples. When you set up by using XSCF
Web, see the "Web browser operation" sections. When you set up by using XSCF
Shell, see the "Command operation" sections.
■
For details on individual XSCF Shell commands, options, and privileges, see
the XSCF Reference Manual or the man page.
■
For details on the screen layout, start procedure, and operation of the XSCF
Web, see
Chapter 9 .
■
For details the connection between a PC and XSCF, the connection to a
terminal, or how to log in to XSCF, see
Chapter 3 .