FUJITSU SPARC M4000 - Manual (Page 325)

Appendix A Warning and Information Messages A-5
Recognizing Status Notification or Fault Information in an SNMP Trap
Message
1. The user recognizes status notification or fault information in the trap
information issued by the SNMP manager from the XSCF. The contents of the
report are the same as those of email.
2. Perform Step 2 to Step 4 above in " Recognizing a Fault in a Message Reported by
Email ".
Recognizing Status Notification or Fault Information in a Monitoring
Message on the XSCF Shell Terminal
1. The user recognizes status notification or fault information in a XSCF
monitoring message output by using showmonitorlog (8) comannd. The
following shows an example of the XSCF monitoring message.
Jun 16 12:20:37 JST 2005 FF2-5-0:Alarm:/CMU#0/CPU#0:XSCF:Uncorrectable error
( 80006000-20010000-0108000112345678)
(The example is subject to change without previous notice for functional
improvement.)
2. To obtain more detailed information, specify the error option and perform the
showlogs (8) command to identify fault information.
3. In the XSCF error log, confirm the contents of entry corresponding to the fault.
(See Appendix B .)
4. Specify the error detail option in showlogs (8) to display the message ID
(MSG-ID). The information can be confirmed by accessing the specified URL
according to the displayed message ID (MSG-ID). Authorized service
personnel use the DIAGCODE (Code) output in the message to acquire more
detailed information.
5. Repair the fault according to the processing recommended by the information
provided on the specified URL.