FUJITSU SPARC M4000 - Manual (Page 132)

2-76 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Note – (1) A user name, authentication password, and encryption password that are
common to both the sending and receiving sides are set for an SNMPv3 user.
Note – (2) If inform is specified, InformRequest is sent using the SNMPv2c agent.
Setting the SNMP Agent’s System Management Information and
Enabling/Disabling the SNMP Agent
■
Command operation
1. Use the showsnmp (8) command to display the SNMP settings.
USM
management
information Sets USM management information for the
following for the SNMP agent:
• Specifying a user authentication algorithm
• Sets authentication/encryption passwords
for users
• Changing authentication/encryption -
passwords for users
• Copying a user
• Deleting a user
setsnmpusm SNMPv3 settings.
Specify the password over
8 characters.
Display VACM
management
information Displays VACM management information
for the SNMP agent showsnmpvacm
VACM
management
information Sets VACM management information for the
following for the SNMP agent: Making
access control group and access control view
(MIB view) settings for a user
• Adds a user account to an access control
group
• Deleting a user from an access control
group
• Creating an MIB access control view
• Deleting an MIB access control view
• Providing an MIB access control view to a
group
• Deleting a group from all MIB access
control views
setsnmpvacm SNMPv3 settings
Any access control view
that is provided to a group
is a Read-Only view.
TABLE 2-17 SNMP Administration (Continued)
Item Description Shell Command Remarks