FUJITSU SPARC M4000 User Manual
Page 88
2-32
SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Adding or Deleting a User Account and Specifying a Password
■
Command operation
1. Use the showuser (8) command to display all of the user account information.
(See the description of the password policy in
.)
XSCF> showuser -l
User Name: user001
UID: 101
Status: Enabled
Minimum: 0
Maximum: 99999
Warning: 7
Inactive: -1
Last Change: Jul 11, 2006
Password Expires: Never
Password Inactive: Never
Account Expires: Never
Privileges: platadm
2. Use the adduser (8) command to add a user account.
<Example 1> Specify a user account name.
XSCF> adduser jsmith
<Example 2> Specify a UID for a user account.
XSCF> adduser –u 359 jsmith
If the XSCF is configured to use Lightweight Directory Access Protocol (LDAP)
for user account data, the user name and UID (if specified) must not already be
in use, either locally or in LDAP.
Note –
You cannot use the following user account names, as they are reserved for
system use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap,
apache, ntp, admin, or default.