FUJITSU SPARC M4000 - Manual (Page 313)

Chapter 9 How to Use the XSCF Web 9-19
TABLE 9-15 lists the functions for configuring XSCF audit. Select [Settings]-[Audit]in
the Menu tree.
TABLE 9-15 Audit Configuration
Function Remarks
Audit enabling and disabling Enable and disable the auditing.
This function is equivalent to the setaudit (8)
command.
Request the archive and data deletion Request the log archive for the audit trail. Also
delete the audit trail in the secondary partition.
This function is equivalent to the setaudit (8)
command.
Audit policy display and setting Display and specify the policy, such as when an
audit trail becomes full, the local audit file usage
threshold (%) that triggers an alarm when reached,
the destination address for that alarm.
This function is equivalent to the setaudit (8)
command.
Audit event/class display and setting Display the audit events and the audit classes.
Also, Enable and disable the audit events and the
audit classes.
This function is equivalent to the setaudit (8)
command.
TABLE 9-16 lists the functions for configuring XSCF mail. This page provides the
SMTP server settings. Select [Settings]-[SMTP] in the Menu tree.
Your own account information display and
password change Displays information of your own account without
the useradm privilege and changes the password.
These functions are equivalent to the showuser (8)
and password (8) commands.
Password policy display and setting Display the current system password policy. And
set the password policy that will be applied now.
These function are equivalent to the
showpasswordpolicy
(8) and
setpasswordpolicy (8) commands.
Privileges for remote user account settings Change the privilege for a user account that is
defined in an LDAP repository.
This function is equivalent to the setprivileges
(8) command.
TABLE 9-14 User Management Configuration (2 of 2)
Function Remarks