FUJITSU SPARC M4000 - Manual (Page 219)

Chapter 4 Operation of the Server 4-11
2. Use the poweroff (8) command to turn off power to all domains.
XSCF> poweroff -a
DomainIDs to power off:00,01,02,03
Continue? [y|n] :y
00 : Powering off
01 : Powering off
02 : Powering off
03 : Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the
"showlogs power".
Note – Only the domains that are able to be powered off are displayed.
Note – If the poweroff (8) command is performed, and the shutdown has
completed, then the domain is powered off.
4.4.3 Domain Power On
■
Command operation
1. Use the showdomainstatus (8) command to check the power status of all
domains.
XSCF> showdomainstatus -a
DID Domain Status
00 Powered Off
01 Running
02 Powered Off
03 Powered Off